1 / 5
Lens Hood for the Nikon 70-180 f4.5-5.6 Micro — zdjęcie 1
1 / 5

Lens Hood for the Nikon 70-180 f4.5-5.6 Micro

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This print is a replacement for the original HB-14lens hood for the Nikon 70-180mm Micro-Nikkor Lens.

Ocena
0 / 5
Polubienia
11
Pobrania
53
Wydruki
0
Wyświetlenia
555
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a derivative of my work from the 50mm f1.8 lens hood I made a while back. The key difference, apart from size and length, is that the 50mm has 2 locking profiles where as this lens has 3. The lock profiles that Nikon built into this one are very thin so this part has very little to grab onto. I did my best with the measurements and tolerances but to keep the lens hood on securely it is a bit tight and can be a bit difficult to get on and off.  The hood is reversible for storage on the lens when not in use and can also be rotated in either direction to be locked or unlocked from the lens. 

 

I would recommend printing with a black matte filament and/or painting the interior with a matte black to reduce as many reflections as possible. 

 

The gcode included here uses a variable extrusion height so that locking profile is printed at .2mm height and the rest of the hood is printed at .25mm. 

Tagi