Lorenz / Malkus / Chaotic Waterwheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a mechanical model that exhibits chaotic dynamics. Widely used as a pedagogic tool in teaching of chaos theory.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wikipedia Article: https://en.wikipedia.org/wiki/Malkus_waterwheel
Youtube : https://youtube.com/shorts/1jZm7up250I?feature=share
Bill of Materials:
- M5 x 16 x 1 (Works as a pivot between axle and base)
- M2 x 16 x 1 (Used to set angle between 0 and 90 in increaments of 15 degree)
- 608zz Ball bearing x 1 (Press fit onto the wheel and axle)
- 3.5mm Wood screw x 2 (Attaches the base to a wood block)
Assembly guide: The base is screwed on to a heavy block (wood or other material) to keep the model stable. M5 screw acts as a pivot between the axle and the base (It passes through one side of the axle, through the base and comes out through the other side of the axle). M2 screw is used to set the angle of the axle between 0 and 90 degrees in increaments of 15 degrees (Same as the M5 screw, but the screw is only pushed in, as the holes are clearance holes) . The model works best at 45 degrees. The 608zz ball bearing is press fit onto the wheel and the axle.
This model has 2 parameters that can be varied: (1) Angle of the wheel plane and (2) Speed of water flow
After assembly the model is placed symmetrically under a tap and the water flow is adjusted as required.