M101 105mm towed Howitzer approximately 1/47 scale.

The gun moves up and down and rotates approximately with the same range as the real gun. All holes and inserts must be filed clear of any flash/brim/support material. Most parts are friction fit, but some need to be glued. Assemble using the photos. Attach Left Tow Bar 2 to Chassis 1 using Tow Bar Pin 3. Attach Right Tow Bar 4 to Assembly A using Tow Bar Pin 5. Install Gun Carriage 6 onto Assembly A bushing. Install Inner Armor 7 onto gun carriage of Assembly A. Install Traverse Handwheel 8 into gun carriage on Assembly A. Use glue to install Elevation Gear 9 into U shaped receptacle on gun carriage. Install Traverse Handwheel into Elevation gear on Assembly A. Use glue to install Left Outer Armor 11 into receptacle hole in chassis of Assembly A. Use glue to install Right Outer Armor 12 into receptacle hole in chassis of Assembly A. Install Lower Armor 13 onto chassis of Assembly A. Install Gun 14 into gun carriage of Assembly A. Install Axle 17 into Wheel 16 and into Tire 15. Repeat for the other wheel assembly. Use glue to install both wheel Assemblies B into chassis of Assembly A. For towing, insert Tow Hitch into both tow bars of Assembly A.