Kingdom Death: Monster - Card Boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy and handy box for each monster of Kingdom Death: Monster. Meant to be used with the organizers in my profile.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
These boxes hold all content of a monster such as AI, Hunt, Hit-Locations, Recources, etc. The boxes also hold additional cards of expansions such as Fighting Arts, Disorders, Armor Sets, etc.
The idea is to have all cards related to a monster (or expansion) in a single box which can be either in the game box if it is in the current campaign or stored somewhere else if it is not in use.
These boxes are designed to be used with these organizers:
❗I do not own every expansion, etc. There simply is too much content. If you are looking to print boxes which I did not include here you can do one of the following:
Create the files yourself. For infos see further down "Original Files". It is really easy and no software needs to be installed.
Put all the cards on top of each other and measure the height of the stack. Send me a message with this measurement and I'll create the files for you.
Dimensions
The height of a sleeved card was ~0.755 mm. The following are the stack-heights of the boxes:
Monster | Card Count | Stack Height [mm] |
|---|---|---|
Butcher | 48 | 30 |
Gold Smoke Knight | 43 | 29 |
Kings Man | 53 | 34 |
Phoenix | 92 | 54 |
Screaming Antelope | 79 | 48 |
The Hand | 43 | 29 |
Watcher | 51 | 35 |
White Lion | 78 | 50 |
Atnas | 75 | 65 |
Crimson Crocodile | 107 | 88 |
Gambler | 51 | 48 |
Godhand | 34 | 28 |
Smog Singers | 97 | 78 |
The King | 112 | 99 |
Dragon King | 76 | 54 |
Dragon King (Tyrant) | 50 | 37 |
Dragon King (People of the Stars) | 31 | 24 |
Dung Beetle Knight | 101 | 72 |
Flower Knight | 86 | 57 |
Gorm | 89 | 57 |
Sun Stalker | 108 | 76 |
Original Files
I created this in onshape. You can create a user, copy and then edit the files. It is really easy and you do not need to install any software.
KDM Card Boxes
To adjust the height of the box, open the variable table and change the configuration variable: "stack_height".
Step 1
Open the document KDM Card Boxes and navigate to the tab "Monster Card Box". If the measured stack height is less than 30 mm navigate to the tab "Monster Card Box - Extra Low"
Step 2
Change the configuration variable "stack_height". This value can be measured by putting all the cards on top of each other.
Step 3
Right-click on the tab and Export as ".stl".
Info
Please contact me if you want to use this commercially, I put alot of effort into this.
I printed these using PLA and a 0.4 mm nozzle.