1 / 7
Chalk box for Gymnastics - Bouldering - CrossFit - Weightlifting — zdjęcie 1
1 / 7

Chalk box for Gymnastics - Bouldering - CrossFit - Weightlifting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I’m currently designing a Chalk Box that’s perfect for grip training with gymnastics straps

Ocena
0 / 5
Polubienia
16
Pobrania
74
Wydruki
0
Wyświetlenia
543
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

New 3D-Printed Chalk Box – Prototype

I’m currently designing a Chalk Box that’s perfect for grip training with gymnastics straps (Ringriemchen / Reckriemchen), but also ideal for bouldering, CrossFit and weightlifting. 

Simply cut a magnesium block (45×45×90 mm / 56 g) in half and place it inside the box.
By turning the adjustment wheel at the bottom, you can smoothly raise the block to exactly the height you need. 

With a built-in magnet (2x 10x30mm) in the housing, the Chalk Box easily attaches to any metal training equipment, keeping it right where you need it.

Parts:

  • 4x M2.5x16 cylinder head screws
  • 2x Magnet 10x30x1.2mm
  • Chalkblock 45x45x90mm

Preparing the chalk block:
After cutting the block in half, just drill a 9 mm hole – this allows the spindle to grip and push the chalk upwards.

You have to be careful when working with the chalk block as it breaks very easily.

The pictures are from a prototype, but the test show that it is a great solution for clean, precise chalking without wasting chalk.

Print Settings

  • Printer brand: Creality
  • Printer: Ender 3 Pro
  • Rafts: No
  • Supports: Based on part
  • Resolution: 0.2
  • Infill: 25% - 100% (thread)
  • Filament material: PLA
  • Filament brand: Anycubic Matte
  • Filament color: White

Tagi