Simple, resizable and modular tape dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tape dispenser, written in OpenSCAD. You could make your own dispenser depend on tape width.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a tape dispenser, written in OpenSCAD.
For masking tapes, mending tapes, scotch tapes, and so on, that have 26mm of inner diameter of paper core.
Features:
- Simple design:
It is simple, only core holder and cutter part.
- Resizable:
OpenSCAD source have only two variables, tape width and base plate thickness.
You could make the dispensers for variable width of tape that you need.
Please change width on top, and render on OpenSCAD, and export STL.
- Modular:
You could make some dispensers to connect with 4mm bolt and nut.
The part for cutting blade came from a part of cling wrap. Please prepare a case of the used cling wrap. After making this dispenser, please insert metal cutting blade from the used cling wrap into the slit.
There is a sample dispenser STL data for 15mm, 18mm, and 24mm tape width, easy to output with your 3D printers.