Hafele Le Mans II (2) blind corner Rail extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Higher fence for a blind corner cupboard to stop tall items falling out
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
We were keeping our water bottles on the blind corner shelf, and when the tray is pulled out, they would all fall off, as the guard rail is very low.
This build creates little fenceposts, that a 4mm bungee cord (i used this one - https://www.amazon.co.uk/Fantasyon-Stretchy-Multifunctional-Drawstring-Backpack/dp/B0C6TB5FXS/ref=sr_1_6?th=1) can be threaded through to create a higher fence around the edge of the shelf.
This is a very tight fit, to make sure the posts don't slide around. The post also has holes available to create a mesh across the shelf, but I haven't used them yet.
This was designed for the Hafele Le Mans 2 blind corner cabinet insert (LeMans II Set, for Blind Corner Cabinets - Häfele), note there appear to be two types of rails, this design is built for the rails where the top rail is circular.
if you are printing more than one at a time, be sure to use a brim, to make sure it stays adhered to the mat.