1 / 4
Spritzschutz für Begrenzungsleuchte Pkw-Anhänger / Splash guard for marker light car trailer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Es müssen 2 Gewindebohrungen M4 an der Konsole angebracht werden. / During assembly, two threaded holes M4 must be made.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Material: PETG
Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 4 / Schichten 5 oben, 5 unten / No Support
Zusätzliches Material / additional material: Schraube / screw 3 pcs M4x10 mm
Gutes Gelingen und über ein Like würde ich mich freuen.
Good luck and I would be happy about a like.