Atomstack P1 metal business card engraving holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for engraving aluminium business cards using Atomstack P1 laser engraver
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Holder to keep in place aluminium business cards for engraving in Atomstack P1 engraver.
Use printable spring stabilizer to keep business card in place, otherwise laser cooling fan will destabilize it and damage the image (business cards are light and air movement caused by fan can lift them).
X/Y corner position for first business card: 10.7 mm, 0 mm
X/Y corner position for second business card: 10.7mm, 54.4 mm
Pro tip: It works better to have two engraving passes with lower laser power than one with bigger power. Atomstack P1 sucks and stutters at complicated raster engraving - max speed should be 2000 mm / min. Green metal cards tend to burn and need different settings than blue/black ones.