1 / 2
OpenRC F1 Guide and Remixed Parts List — zdjęcie 1
1 / 2

OpenRC F1 Guide and Remixed Parts List

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

To save you the research time, I’ve compiled all the parts, custom remixes, and hardware recommendations from my persona

Ocena
0 / 5
Polubienia
5
Pobrania
15
Wydruki
0
Wyświetlenia
187
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
GNU General Public License v3.0

OpenRC F1: My Ultimate "Original" Remix Collection

The original OpenRC F1 remains a classic, but tracking down the best community upgrades across dozens of pages is a headache. I’ve compiled this "best-of" collection based on my own personal build to save you the hunt.

I chose these specific parts to balance performance and reliability without over-complicating the chassis with heavy suspensions or DAS steering.

Key Upgrades Included:

  • Power: Rear differential with a belt-pulley system and square profile axle.

  • Cooling: Redesigned motor cover and lid for better airflow.

  • Handling: Two front-end configurations (v1 Standard & v2 Suspension) with optimized Ackermann geometry to eliminate gimbal lock and significantly improve turning radius.

  • Aesthetics: Upgraded high-detail front and rear wings.

  • Tires: Custom rims designed for DIY silicone molding for better grip and lower cost.

Everything you need—my remixed parts, the BOM, and links—is right here in one place. Hopefully, this saves you the weeks of research I put in so you can get straight to the track! 

Printing Tips:

  • In your slicer, enable “external perimeters first” for better dimensional accuracy. 

  • Print the gears  with %100 infill, 0.12 layer height and  in nylon if possible, or use tough PLA as an alternative.

Differential with Belt Pulley & Square Profile Rear Axle

Rims for silicone molding : 


🏎 Steering & Front End Options

Performance Front End (With Suspension)

This version uses flexible parts to provide functional front dampening.

  • Original BOM Components (Download from Original Project):

    • front_wheel_axle.stl (x2)

    • servo_saver_lower.stl

    • Front_Wheel_Hub.stl (x2)

    • Servo_Saver_Upper.stl

  • Suspension Parts (Download from Thingiverse 2069719):

    • top_arms_split.stl

    • flex_blockV3.stl (TPU - 30% Infill / 2 Walls)

    • Flex_Lower_BOM.stl (TPU - 30% Infill / 2 Walls) 

  • Connectors: Servo Saver connector & Servo connector

  • Steering Pin:  Stackable Steering Pins(x2)

  • Extra: merged_front_wheel_axle_and_wheel_hub.stl
    I integrated the front_wheel_axle and front_wheel_hub_mod into a single part and enlarged the push-pin connection hole to accommodate an M3 threaded insert. This modification prevents the M3 bolt from stripping the plastic threads.


💡 Pro Tip: Reinforcing the Front Axle

To prevent the 3D-printed plastic from shattering under high loads or high-speed impacts, use long M3 bolts from both sides of the wheel axle so they meet in the middle. This creates a solid metal inner core throughout the entire axle, providing much-needed structural integrity to the printed part.


Body, Aero & Enhanced Cooling

I combined 2022 and 2023 design elements for a modern look and better airflow to the motor.

Visual & Aero Upgrades:

2023 Aesthetic Set (Download from Thingiverse 6665686):

  • Lid_with_Vent_-_CrackFox.stl (Intake ducts + halo support)

  • Front_Vented_2023.stl (Vented front + halo support)

  • Nose_2023.stl (Nose with small wings)

  • Halo_-_CrackFox.stl


Remaining Original Parts

You will still need these core files from the Original Project to complete the chassis:

  • chassie_rear.stl

  • chassie_front.stl

  • main_turning_vane_left.stl / main_turning_vane_right.stl

  • servo_holder.stl

  • rainlight_and_diffuser.stl

  • camera.stl

  • rear_view_mirror_left.stl / rear_view_mirror_right.stl

  • wheel_axle_holder_right.stl / wheel_axle_holder_left.stl

  • wheel_lock_nut.stl (x3)

Electronics & Hardware Guide

Based on my build experience, here is the hardware I recommend. I’ve focused on reliability—it's worth spending a few extra dollars now to avoid a total teardown later.

1. Steer with Quality (Servos)

Don't go for the absolute cheapest servos; they tend to strip or fail under load. Based on my testing and community feedback, here is the quality hierarchy: Savox > KST > Tower Pro > Corona > Emax.

  • Note: 9imod is also a solid budget-friendly contender gaining good reviews.

2. Power System (Motor & ESC)

  • Motor: NEEBRC 540 35T

  • ESC: 60A ESC

  • Pro-Tip: Watch out for the 3.17mm short shaft on this specific motor. Ensure your pulley alignment accounts for the reduced length.

3. Customization & Parametric Tools

If you are using a different motor or shaft size, you’ll likely need to generate custom gears. I used these OpenSCAD libraries to tweak my build:

4. Extras

5. Remote Controller  Settings 

This part will be updated with remote-controller settings... 

Tagi