Front vent for SV08 Top hat by Nadir
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a manual vent for left front panel of Nadir's top hat
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 335
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Manual vent to allow some fresh air to go into the enclosure with doors closed.
You can use it as front left or back right panel.
Compatible with 5" and 7" display variant
Shutter is hold on closed by 4pc of 6x3mm magnets.
You will need:
- 1pc M3x12mm bolt instead of long one from Nadir's original design
- 1pc M3x10mm with tapered head for the slider.
- 1pc M3x6mm heat insert for slider
- 1pc M3x4mm heat insert for top
- 4pc 6x3mm round magnets
Use a little bit of lube in the v slots for better movement.
Printing:
I have printed it laying flat on the back with standard supports on.
Same settings as nadir recommends for his top hat.
-----------------------
Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)