1 / 9
Langmuir MR-1 Drag Chain Mount and Probe Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drag Chain and Probe mount for Langmuir MR-1
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
MR-1 Drag Chain mount that includes a holder for the Langmuir probe.
CAD file included so you can adjust for your choice of bearings and fastner.
Will require a longer #8 thread forming screw. #8 x 5/8 is what I went with.
I used 16x5-M5 bearings and an M5x35mm bolt with M5 Nylock.
Drag Chain designed by Darko Saric Lukendic at GrabCAD