Cool Sunanas: Pineapple with Sunglasses (HueForge)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ananas with sunglasses on a bed, made with HueForge software. 133.33x200mm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ananas with sunglasses on a bed, made with HueForge software.
Print in PLA or PETG at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Nozzle: 0.4 mm.
The Model is 133.33x200mm in size. You may scale down it's size (X-Y only, keep the thickness!), although the details such as the glasses frame won't look as nice as in the original size. The sample image was printed in approx. 95 x 142 mm.
You may print at higher layer heights below the Min Depth of 0.24mm (Max Depth: 2.4mm).
Filaments Used:
- PLA+ Elegoo Black (Transmission Distance: 0.3)
- PLA PolyTerra Forest Green ((Transmission Distance: 0.5))
- PLA PolyTerra Savannah Yellow ((Transmission Distance: 3.5))
- PLA+ Elegoo White ((Transmission Distance: 6))
This print uses 4 unique filamentsThis print uses 4 unique filaments. You may swap with similar colors/transmission distances.
Swap Instructions:
- Start with Black
- At layer #5 (0.48mm) swap to Forest Green
- At layer #7 (0.64mm) swap to Savannah Yellow
- At layer #11 (0.96mm) swap to White for the rest.
Adapted from a Photo by Elena Cordery from Unsplash.