AC-3200 Skadis T-Nut mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Skadis T-Nut version of ASUS AC-3200 mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
For the T-Nuts look at: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb. By default the holes are made for M2.5 version.
The router sticks out on Skadis board by the size of a mount, is it has some cooling. I attached mine with the mounting holes at the bottom. The image has the printed version where i messed up the holes and had to drill them, but the attached model has correct dimensions and screws' heads are not sticking out.
The hole parameters are:
- Head diameter: 5mm
- Head height: 3mm
- Thread diameter: 3mm
If you need different hole sizes I attached the f3d file, where you can change the hole parameters (Modify → Change Parameters).
Note: The model is based on original STL file so it is a mess in short.