1 / 2
Sliding Pommel for Blue Ice Akila Ice Axe — zdjęcie 1
1 / 2

Sliding Pommel for Blue Ice Akila Ice Axe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

By request, an adjustable pommel for an ice axe. Secured with socket head bolt and nut.

Ocena
0 / 5
Polubienia
5
Pobrania
15
Wydruki
0
Wyświetlenia
118
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

An initial version of an adjustable pommel for a technical ice axe. I printed everything in TPU with 6 walls and 50% gyroid infill. I can see a slightly more ergonomic design in the future, but this will work for now!

The insert is ~0.4mm thinner than the slot in the main piece to allow for compression on the handle. Possibly redundant given the flex of TPU, but it is working great on the prototype for now. (Dry filament and slower printing always helps for TPU.)

I intended to use metric fasteners but the only thing I had on hand was 1/4-20 socket head bolts, so I used that at 5/8" length. The nut was a tight fit, but with TPU it just needed a little tightening to slide in and make for a very secure fitting.

I'll be waiting until deep winter to get a little feedback and make some tweaks, so I'll consider this a work in progress for now. If you have ideas or requests please let me know. Thank you for looking!

Tagi