SKADIS Mount for Synology DiskStation, DS223
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the wall mount from @Hemi345 and the skadis supports from Ryan Plourde
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Skadis Mount Brackets for Synology DS223 NAS
Remix of the wall mount from @Hemi345 and the skadis supports from Ryan Plourde
These brackets can be used with any Synology DiskStation 2-bay Plus, Value, or J-series NAS: DS218, DS223j, DS223, DS224+, etc.
Space the brackets apart to fit, and the flange will trap the Synology’s feet, preventing it from sliding out.
This design does not restrict any of the airflow vents on the bottom or sides of the NAS.
I printed these using Creality PETG Black with 3 walls, 15% cross-hatch infill, and 4 top and bottom layers at 0.20 mm layer height.
Supports are required for the hooks.
The hooks fit snug and strong on the board.
Thank you all for the support and the models provided. This is my first remix and share here. I used Onshape to merge models — quite a learning experience!