Fixum Dude Motors PiP Diesel Train
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,21 € – 2,70 € netto (bez VAT)
Dla pliku: FDM_PrintInPlaceTrain_FlatCar_0.4n_0.2mm_PLA_MK4IS_1h55m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,45 € netto (środek widełek).
- Masa podana przez autora
- 42 g
- Czas druku podany przez autora
- 1,91 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Six different chunky train cars that print in place and hook together for hours of fun.
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 338
- Wydruki
- 9
- Wyświetlenia
- 932
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Standard Digital File License
One engine plus five different train cars included in this simple print in place train set. All the cars print without supports with wheels and hooks that move right off the build plate.
Examples printed at 0.2 mm layer height with 3 walls and 10% gyroid infill for extra strength.
Bambu Studio project included. Cars in the project are printed a bit slower to get a good first layer. Good bed adhesion is needed for the hook and the wheels to print properly.