3-inch Spindle Hub Outer Ring: HP Latex 360, 370, 330, 310, 110 Series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct replacement for the outer ring of the HP 3-inch spindle hub. (Latex 360, 370, 330, 310, 110 Series)
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
We recently bought a used HP Latex 360, and two of the hubs were pretty banged up, so I made this. I know it’s a very niche use case, but I wanted to make it available on the off chance it can help someone else.
This is a direct replacement for the outer ring of the 3-inch spindle hub.
Printing Tips:
PETG Recommended
Infill: 40%
Perimeter: 4 (might be overkill, but it’s solid as a rock.)
Use supports on the build plate only.
Add enforcers for the screw holes, or you'll be digging that out (so much fun).
Print screw holes down with supports for the best results. I used snug, but use whatever works for you.
Note: First picture has a funky hole in the part, but I fixed that in revision two. (holes were miss aligned slightly.