Candy-Floss Bat Oval Logo Press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Candy-Floss shaper
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The 3D print shape was design to take advantage of the K2 Plus bed size for large one piece object creation.The parts separated on two plates due to size. You may try to resize if it you want a smaller size. The shape was made specifically for candy-floss decoration creations, but can probably be used on cookie dough, clay like pottery or else.
The way the shape is used is placing a generous handful of cotton candy into the 3D-printed oval cavity on a clean tray or table. Use the press with the handle to press down firmly and evenly, add more floss and repeat until the cavity is fully compacted and holds the oval shape. Lift the press, remove the molded cotton-candy oval, and finish or layer as desired for display. Use the large batman cookie cutter shape to cut out the batman logo for placement on top.
Recommended to use food-safe PLA to print this.