1 / 5
Nuki Smart Lock PRO (5th Gen) CH-Zylinder (Knob) — zdjęcie 1
1 / 5

Nuki Smart Lock PRO (5th Gen) CH-Zylinder (Knob)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This adapter mounts onto an 8mm double flat shaft—a round shaft with two parallel flats spaced 6mm apart

Ocena
5 / 5
Polubienia
2
Pobrania
75
Wydruki
1
Wyświetlenia
792
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Prepare the Key Adapter
The key includes a cavity for an M3 threaded insert, allowing you to secure it with a set screw.

Install Threaded Inserts into the Base
The printed base has two holes designed for M4 threaded inserts. These provide mounting points for the Nuki-provided mounting plate.

Mount the Base to the Door
Attach the base using strong double-sided adhesive tape. Ensure proper alignment with the CH-Zylinder knob.

Attach the Nuki Mounting Plate
Use your own M4 screws to fasten the Nuki-provided (see pictures) mounting plate to the threaded inserts in the base.

Install the Key Adapter
Slide the adapter onto double flat shaft of the cylinder knob. Tighten the M3 set screw if needed.

Click in the Nuki Smart Lock
Snap the Nuki Smart Lock PRO into place following the standard installation procedure.

Bill of Materials (BOM)

ItemQuantityNotes
3D printed parts3Base, key adapter, Ring
M4 threaded inserts (Base)2For mounting plate attachment
M3 threaded insert (Key)1For securing the key with set screw
M4 × ~10mm screws2To mount Nuki plate to base
M3 × ~5mm set screw1To secure key adapter to shaft

 

Tagi