1 / 3
Elegoo Centauri Carbon Top Glass and Build Plate Holder(Staggered)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of my earlier remix, decided to stagger the build plates to make them easier to see and grab.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 252
- Wydruki
- 2
- Wyświetlenia
- 1078
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (22)Powiązane
Just a remix of a remix. Print at 0.2 or 0.16 layer height on your Centauri Carbon(if you are using a bed slinger to print this, make sure and turn it long ways in the direction of the beds movement to keep it from falling over).