1 / 1
ATX PSU bracket for 10 inch rack 220x220 mm Version
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2U sized mount for an ATX PSU in a 10 inch rack modified for a 220x220mm build plate
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 871
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (38)Powiązane
2U sized mount for an ATX PSU in a 10-inch rack modified for a 220×220 mm build plate
I would highly recommend printing in PETG rather than PLA, as PLA may deform from tension and heat.
If you place this model in the centre of the build plate and rotate it 45 degrees, it will fit. Place the front plate of the model face-down on the bed.
Recommended settings:
- Wall loops: 4
- Top shell layers: 7
- Bottom shell layers: 7
- Sparse infill density: 40–50%
- Sparse infill pattern: Cubic
- Support: Tree (automatic)