Fillament spool support for Easythreed k7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fillament spool support for Easythreed k7 (and other models)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
2 versions: With spool support and only z axis guide!
Spool holder for the Easythreed K7, using the model (https://www.thingiverse.com/thing:4870760) as a base. What I did was create a new adapter for this part; the fit is perfect.
It fits some Easythreed printers besides the K7; you just need to check if it physically fits.
Additionally, on the back, there is a guide for the Z-axis lead screw. Just insert a 608-ZZ bearing (it's a press-fit) for the lead screw to rotate without friction.
Print it vertically; it requires supports!
If the connection to the vertical guides is loose (as happened to me), just add a bit of epoxy glue, and it will hold very well.