1 / 1
Dyson old (DC52) to Hoover 40mm OD adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to use Hoover accessories with 40mm OD with older Dyson vacuums
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapter to use a 40mm OD Hoover attachment with an older Dyson (DC52 is what I have). You will need to add a single layer of electrical tape onto the male part of the Hoover attachment to get a solid attachment as otherwise you are just sliding smooth plastic into smooth plastic.
Printed at 0.35 with 30% infill & organic supports of 45% overhangs with a brim - skinnier side down in PLA+ on MK2S - took 1:15 to print.