Motoguzzi Norge Belly Pan Mount Replacements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slip fit inserts that fix broken mounts and provide a sturdy base for the fairing bolts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
The original fairing plastic tends to break easily when it gets bolted onto the engine leaving you without any way to mount it.
I looked into glassing it (fiberglass) and even plastic welding but I could not guarantee that the plastic would hold properly since it was so damaged, so then I decided to mock up a slip-fit insert that I could epoxy into the fairing.
The measurement was a bit difficult because there was no schematic or drawing online, in the end I resorted to a Post-it note curled up and marked off where it would sit flush with the fairing. I also made sure that the conical taper matched the internal dimensions of the fairing so that there would be no uneven pressure on it.
The slip fit worked so well that I don't even need to glue or epoxy it in - just push into place and then bolt as normal.
The bottom of the insert is 6mm thick to provide enough strength for the heavy-handed mechanics that want to overtighten things :)
Printed out of ASA @ 0.2