Interlocking Knockbox for Delonghi with TPU sleeve and antispill belt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of compact interlocking knockbox for Delonghi portafilter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My print was made with PETG for strength, so I've also added an optional TPU sleeve to make it a bit quieter and hit the counter softer.
For main part 3-4 walls are good with 15-20% infill (I've used support cubic). I've used painted prusaslicer supports and they worked fine; it would be good to leave a gap between supports and outer wall for ease of removal. Filter fits tightly in my print, so I've added version with increased vertical clearance; it actually needs to lock in just a little bit, so those overhang parts could be reduced to a few mm, but they look cooler this way.
For sleeve I've used 2 walls and 3 bottom/top layers with 15% gyroid infill. It fits just right and doesn't require gluing and can be easily removed.