Movie Maniacs | Jason
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make mommy proud, Jason, don't let them escape!....presented in multicolor or single color and paint.
- Ocena
- 5 / 5
- Polubienia
- 291
- Pobrania
- 692
- Wydruki
- 2
- Wyświetlenia
- 3609
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Overview
Make mommy proud, Jason, don't let them escape! This figure stands about 100mm tall and is split up into parts to accommodate a 4 color multicolor system for your convenience. This is an Orca project file, and will likely only work in Orca.
Printing
- Connectors-No support
- Body-No support
- Arm-Most difficult. I print on knuckles. you could also try printing on the arm socket.
Connectors will need to be scaled or trimmed to size. I personally shrink the x and y coordinates in my slicer to 98%. This number will vary printer to printer due to tolerances.
Nozzle: .4
Filament: PLA/PETG
Layer Height: .2
Supports: Yes. See above.
Take a look at the other Movie Maniacs while you are here, or any of my other Spooky Themed Items.
Need a scary story for Halloween? Look at my collection of short stories!
Like My Work?
❤ a few of my models
or
Special Thanks: FavPNG for the fantastic images!
Edit 10/4/25: Blender file uploaded for the haters.
Edit 10/15/25: Error addressed with machete connector. Piece is not needed.