1 / 5
Magnetic Poop Container for Bambu Lab X1C / X1 / P1P / P1S — zdjęcie 1
1 / 5

Magnetic Poop Container for Bambu Lab X1C / X1 / P1P / P1S

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic poop container with four holes for magnets (10mm x 2.3mm) to be glued into.

Ocena
5 / 5
Polubienia
4
Pobrania
61
Wydruki
1
Wyświetlenia
325
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Contact me if you plan to use magnets that are not 10mm x 2.3mm and I will alter the model to fit your needs. This will interfere with the stock filament spool holder on the rear of the printer, so an alternative spool location is required (see my Side Spool Holder model), however, this will not interfere with the AMS.

Model Dimensions: 3in x 3in x 9.88in

Material Used: Polymaker PolyLite PLA Pro, Metallic Chrome (SKU: PA07057)

My Print Settings - Printer: Bambu Lab X1C, Slicer: Bambu Studio, Build Plate: Textured PEI, Layer Height: 0.2mm, Wall Loops: 4, Infill: Grid at 15%, Supports: Tree (auto), Strong