Movie Maniacs | Michael
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's Halloween, everyone's entitled to one good scare.....presented in multicolor or single color and paint.
- Ocena
- 5 / 5
- Polubienia
- 249
- Pobrania
- 525
- Wydruki
- 3
- Wyświetlenia
- 2319
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Overview
It's Halloween, everyone is entitled to one good scare! This figure stands about 100mm tall and is split up into parts to accommodate a 4 color multicolor system for your convenience. This is an Orca project file, and will likely only work in Orca.
Printing
- Connectors-No support
- Body-No support
- Arm-Most difficult. I print on knuckles. you could also try printing on the arm socket.
- Head-print at a 45 to hide witness marks
Connectors will need to be scaled or trimmed to size. I personally shrink the x and y coordinates in my slicer to 98%. This number will vary printer to printer due to tolerances.
Nozzle: .4
Filament: PLA/PETG
Layer Height: .2
Supports: Yes. See above.
Take a look at the other Movie Maniacs while you are here, or any of my other Spooky Themed Items.
Need a scary story for Halloween? Look at my collection of short stories!
Like My Work?
❤ a few of my models
or
Special Thanks: FavPNG for the fantastic images!
Edit 10/4/25: Blender file uploaded for the haters.