Box with Lid - electronic time delay box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a box to house the ‘timer delay off’ circuit board for mounting it in my garage. This design allows the the box…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 670
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a box to house the ‘timer delay off’ circuit board for mounting it in my garage. This design allows the the box to be fitted in place and then the circuit board can be fitted inside after wires are connected.
I wanted a LED light mounted above my garage door to shine a light so I am able to see the key/lock, when it’s dark. I’ve wired a small momentary switch to activate the timer circuit which then turns on the LED unit.
This is all using components I already had but were just in storage.
Category: Electronics