Toolheads for Heatcore 4 / heatflux / heatcore lite ALPS on Voron V0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of toolheads that I have designed of the mellow fly heatcore 4 ALPS on voron v0
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 582
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
update 10/28/26 - big thank TheNexusAvenger for reminding me to update this for more frequent updates please check my website amovfc.com
STUPID BURNER
^video
So a while ago I added the latest version of my rapid burner, which I am calling the stupid burner, because it is a stupid toolhead (in my opinion). It replaces almost everything from the original rapid burner, it does not use the stock voron v0 belt block / x carriage, instead the hotend mount is what mounts to the linear rail (mgn9 not the stock mgn7) and then the belts get attached to speed clips which were orginaly designed by zruncho these then go into a belt block which screws onto the bottom of the hotend carriage. The speed clips do require a . Then the cowl is slid on and screwed screws lock it in place. There is a cable slot in the back of the hotend carriage for all the hotend cables and the ALPS sensor cable.
Required materials for the stupid burner speed clips.
2x Metal Tubes
These are metal tubes, into which the belt pins go.
Width: Two sizes are recommended:
Metric: 4mm OD, 3.2mm ID
English: 5/32" OD (3.97mm) x 0.014"
Rapid Burner
This is a modified rapid burner, cowling and hotend mount. it uses the stock voron v0 belt block. Originally designed for the heatcore 4, the latest version should be compatable with the heatflux. this means that the heatcore 4 will be a bit long for this toolhead. (feel free to comment if you want me to confirm this before you print). This toolhead is compatable with the stock rapid burner orbiter mount as tested by TheNexusAvenger, the other option is to put a filament cutter in the place of the extruder mount, that is the option I went for, and used a crossbow filament cutter
Dragon Burner
This is a adjusted dragon burner cowl to fit the Heatflux hotend with the shorter goliath hotend ALPS module, this means that unless you are running this specific strange configuration the ducts will be 1-3mm too high relative to your nozzle tip. I recomend you download the step file and move the ducts accordingly. Also this was designed with the HF dragon burner hotend mount in mind results my vary with different hotend mounts.
Mini Stealthburner
all old designs, haven't been touched since they were first made. they are for the heatcore 4, not the heatflux
update 7/6/2026
added the normal dragon burner toolhead, slightly do configuration since i broke one of my alps sensors so i ordered a new one, but accidentally got the one for the goliath hotend rather than for the heatflux. the difference appears to me to be somwhere between 2.4-2.7 mm shorter it seems.
NOTE THE HEATFLUX IS NOT THE HEATCORE
I first made the mini stealth burner mount(one for stock extruder and one for orbiter), it works well enough, but it places the nozzle lower than I would like causing a reduction in max z height. Next I started working on the Yavoth toolhead modifications and the rapid burner, the rapid burner mounts the hotend higher than the other toolheads and is the one I have used the most, with the rapid burner there is no z height lost. The Yavoth toolhead needs more testing but I will update when i can