Convex knife sharpener attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable angle to sharpen a convex blade edge. Model is similar to TSPROF Ultra
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Looks similar to TSPROF Ultra convex attachment. For use ideally with 6mm M6 threads, see comments below.
Print two of the cylinder and one adapter. For the main part ("adapter") print with auto generated tree support from bottom plate only.
BoM - Bill of Materials:
- 2x brass insert m6 OD8 (for the cylinders - connecting support rod and stone holder)
- 2x brass insert m3 OD4.5 (tightening)
- 2x m3 16mm screw (tightening)
- a short threaded rod m6 or a bolt with small head or the head cut off - to be able to connect to the stone holder part of the rod.*
* For Xarilk Gen 3 I used a M6-M4 short "male-male" adapter to fit the more unusual Xarilk m4 thread for 6mm rods, and for the support rod side I used a more common M6 6mm rod. The short threaded rod that translates from female-male can be attached with thread lock for reliability.