Toothless - How To Train Your Dragon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of Toothless the dragon, from How To Train Your Dragon
- Ocena
- 4,5 / 5
- Polubienia
- 264
- Pobrania
- 2662
- Wydruki
- 6
- Wyświetlenia
- 21 653
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is actually a remix of a model from Thingiverse. Credit where credit is due: https://www.thingiverse.com/thing:3466550
I've modified the base and tail section to make it a smaller, more manageable print.
Make sure to keep a decent gap from the supports on the tail or it can be really difficult to remove the supports without breaking the tail off.
Also, the wings can be tricky to print as they're so tall and thin so it might be worth slowing the print right down for that part and possibly turning on Z hop. I had the nozzle crash into the wings and ruin the print as they can flex in weird ways as the nozzle moves over them.
Thanks to @CyBerJak for helping fix the thickness issue on the wing that was causing it to print with a hole in it!