v.PC AlphaCool Reservoir Mount for Voron PC Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alphacool Reservoir mounts to add watercooling hardware to the v.PC Voron inspired PC Case project!
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
v.PC – Alphacool Core 200 Reservoir Mount for the Voron inspried PC
This is an add-on part for my Voron-inspired PC case project: v.PC - Voron inspired PC Case
It is designed only for the Alphacool Core 200 reservoir and I cannot guarantee compatibility with other models.
🔹 Notes:
Intended for use w/ Alphacool Core 200 Rerservoir: Affiliate Link
This mount is very specific to my build and is not part of the base case files.
You may need to adapt or remix it if you’re using different reservoir hardware.
Provided as-is for anyone who wants to replicate my setup or create their own variation.
📌 Print Settings
Nozzle: 0.4 mm
Layer Height: 0.2 mm
Infill: 40%+ for strength
Material: ASA/ABS recommended, PETG likely ok, PLA NOT recommended.
⚖ License
Released under the GPL-3.0 Open Source License. Remixing encouraged, but please credit and link back to the original design.
If you adapt this to fit other reservoirs, consider sharing your remix with the community!
Support:
Please consider supporting my work on Patreon or via my other Social Medias: LinkTree