1 / 6
HPI Baja 5B - Reciver Box Lid / Magnetic Lid-Cover / Fast Reciver-Lipo Change
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For me this was the quickest solution to changing the receiver battery. Read the description.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Lipos must not be left in the car. So I was looking for a solution to quickly swap the 2S receiver lipo on my old HPI Baja 5B.
- Lid fits directly onto the original receiver box.
- Eight 5x20x2mm neodymium magnets are required.
- Magnets must be glued with epoxy into the lid and the lid_cover.
- Printed in PETG with 15% infill.
- The handle is attached with M3 screws.