Gjermundbu Viking Helmet inner liner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An inner liner for the helmet to make it a little more wearable.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
I was planning to make leather inner liners so I could wear the helmet without it falling down my ears. At the time I was playing around with some TPU prints and realised that TPU should work. instead of leather.
I designed the file in Fusion 360 after marking a few adjustments along the way to get the curvature to work.
Print two each of the stl and it's reverse in TPU (I used Creality) and glue them in just above the eyeline with long edges front/back and short edges left/right. Thread some string through the holes and tighten as necessary.