Leaf decorated planter with drainage holes and tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used the leaf model to decorate an indoors planter that will work beautifully with any plants.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a planter and added the leaf skeletons for decoration (projecting them onto the shape of the planter). The model has drainage holes as well as a small tray to collect any extra water so that you can use it indoors.
I printed this on PLA+ and a 0.4 mm nozzle with no supports without issues, but some of the unsupported regions may not look as smooth (mainly the very bottom, but this gets hidden by the plate). Feel free to add support for a flawless finish. I found my 0.4 mm nozzle could resolve the leaf skeleton without issues at the original size (~5.2 cm planter).
Regarding sizing, the image shows the size of the provided stl files, which is about 5.2 cm inner diameter (ID) at the top, 6.7 cm in diameter at the widest part (D max). I include a table to calculate the scale depending on the planter size you would like to make, based on the upper diameter (ID = Inner diameter, OD = outer diameter, D max = Diameter at widest part, H = Height without the base).
| File | Scale (x) | ID (cm) | OD (cm) | D max (cm) | H (cm) |
| Original | 1 | 5.2 | 5.8 | 6.5 | 5.2 |
| Scale x | 2 | 10.4 | 11.6 | 13 | 10.4 |
| Scale x | 2.3 | 12 | 13.3 | 15 | 12 |
| Scale x | 3.85 | 20 | 22.3 | 25 | 20 |
| Scale x | 4.8 | 25 | 27.8 | 31.2 | 25 |
| Scale x | 5.77 | 30 | 33.5 | 37.5 | 30 |
If you like this model and you would like to support me to make modifications and further models in the future, you can buy me a coffee: https://paypal.me/LadyDough91?country.x=GB&locale.x=en_GB
What should I make next? Let me know in the comments!