Babylove Lock Adapter Schubladensicherung
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for Babylove Drawer Lock - Adapter für DM babylove Schubladensicherung
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on https://www.printables.com/model/158797-horizontal-mount-for-babylove-lock/comments/2884029
I cut the original model at the minimum required height for the Babylove lock to work.
As my shelf didnt allow any mounting internally or between drawers, I needed an adapter which would allow mounting it on the front at the vertical board to which the drawers are mounted.
To increase stability, I recommend changing the printing orientation by 90° with respect to the image shown. This way the layers are vertical, not horizonal, which decreases the chance of ripping of the adapter from its base plate by accident.
I printed mine with easyABS, obviously any type of strong filament is recommended.