Tamiya MF-01X extension to 257mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is extension of MF01X to 257mm wheelbase (as original extensions can be stacked only to 254mm), based on my early…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 588
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is extension of MF01X to 257mm wheelbase (as original extensions can be stacked only to 254mm), based on my early design. I modified it to include some space for electronics. Two halves are connected by pillars, which can be printed or replaced by some more rigid variant.
I included a jig for precise driling of a new driveshaft - it uses piece of teflon tube as lining to lead 2mm drill. It should fit very tightly around the shaft and is meant to be discarded after a single use.
Drawing for a new driveshaft is also included in thing files.
You'll need TL01 arms and 39mm dogbones to increase width from "M" size
Or you can use my design
with 45mm driveshafts for "MF01XXL" variant https://www.thingiverse.com/thing:5049235
or long span suspension https://www.thingiverse.com/thing:5049748
update: added pictures, modified models for better fit
Category: R/C Vehicles