Custom Lightsaber Hilt (Threaded Segments)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got tired of there not being any decent lightsaber hilt designs that were modular and threaded. I like building…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 646
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
I got tired of there not being any decent lightsaber hilt designs that were modular and threaded. I like building model sabers, and needed a more adaptable way to add electronics and clean and paint individual segments easier without them having to be permanently glued to each other in the process. My print settings are listed, but remember, settings are not universal, varying depending on printer, leveling, material, and even the surrounding environment.
Print Settings
Printer:
Tronxy
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2 mm is what I used
Infill:
Varies based on your purpose for the model. I used 60%
Notes:
PLA at 200 C, bed at 65 C (Glass bed), print speed 75 mm/s, retraction distance 2.5 mm, retraction speed 30 mm/s
Category: Props