Voxelab Aquila Extruder Intake PTFE Guide Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A PTFE guide clip for the Voxelab Aquila's extruder intake, intended for routing filament through a ptfe tube from a…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 526
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A PTFE guide clip for the Voxelab Aquila's extruder intake, intended for routing filament through a ptfe tube from a dry box.
I designed this part to be at the same height as this cheap dual gear extruder.
Requires 2x m3x6 (can be longer) to mount
I am still waiting on a longer ptfe tube to be delivered so no ptfe tube is in my pic but it does fit some capricorn 4mm OD offcuts I had so I think it should be fine.
Print Settings
Printer:
Voxelab Aquila
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
15
Filament:
Overture PLA
Green
Category: 3D Printer Accessories