HOTEND HOLDER for Flashforge Adventurer 5M / 5M Pro (remix with larger cutouts and provision for magnets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HOTEND HOLDER for Flashforge Adventurer 5M / 5M Pro remix for printing with a. 0.6mm nozzle at 0.3mm layer height.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
9mmplease's hotend holder for the Flashforge Adventurer is a neat design as it allows easy access to the most common sizes of hotends.
However I had issues printing the original hotend with my 0.6mm nozzle at a 0.3mm layer height. The top of the hotends simply didn't fit into the grooved/ribbed openings. So I expanded these openings to not require the hotend top to fit into the grooves.
I also wanted the flexibility of moving the holder anywhere on my printer, so added depressions for press-fitting 5mmx2mm rare earth magnets. There is room for 6 magnets in total as the weight of the hotends seems to require this many.