Toothbrush Holder (family size)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a three part build that when glued together makes a useful toothbrush holder for the entire family
- Ocena
- 4 / 5
- Polubienia
- 38
- Pobrania
- 209
- Wydruki
- 4
- Wyświetlenia
- 1282
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Theis family sized tooth brush holder comes as three stl flies, bottom, middle and top, and can all be fitted onto a Prusa Mk3 buildplate.
Print in a bright PLA or PETG with a minimun of 4 outer walls to give strength. Each part has location holes so that its neighbouring part fits snuggly into it.
This can also be printed in 3 different colous to cheer up any bathroom.
Print each part, with largest falt surface touching the build plate..
Print time about 5 hours and use superglue to complete the build.
Good luck and happy brushing .