DIVIDER BRACKET MOUNT FOR FORD F150 DIY RAILS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this divider bracket mount so I can re-purpose Deck Boards I had as a divider for my truck bed.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 618
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATED: 10-11-25
Updated the design to utilize a 3d printed pin to secure the bracket. I noticed the brackets move vertically from when the truck goes over bumps. The added hole and pin should secure the bracket on the Uni Strut rail.
This updated design utilizes a 3d printed pin that i remixed by shortening it found HERE
-------
I wanted a divider for my bed truck but the ones in the market are too expensive for me. Others required drilling or taking out my truck tail lights to mount the brackets for the divider.
I just needed as simple as being to utilize the bed of the truck without stuff sliding around.
I designed this divider bracket mount so I can re-purpose Deck Boards that I had laying around, and utilized them as a divider for my truck bed.
This bracket mounts to DIY rails I put in on my Ford F150 Flash lightning truck. I used Uni Strut rails.
if you are interested in making the rails, here are the YT videos I combined and used as a guide.