3D Printable 2-2.5" FPV Drone Frame - noonefpv2.5 BETA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beta version of the fully 3D printable 2.5" FPV drone frame
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 790
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Final version is out! Check it out here:
This is a Beta version of the noonefpv 2.5" drone frame - I'm still working on finishing this design, but you can download it and try it out now completely for free!
This frame uses triangular shapes, which makes it comparable to similar size and weight carbon fiber frames - at only 8g it is very rigid horizontally, and it won't break as a regular carbon fiber frame.
It uses 25.5x25.5mm m2 AIO mounting holes, which allow usage of all the popular AIO flight controllers, and works with dozens of 3D-printable toothpick/tinywhoop canopies. Motor mounting is 9mm, so it works with most of the motors for regular 2-2.5" quads.
Note: 2.5" props overlap with the flight controller, but if you're using a bit smaller props or a single-board AIO, it should be fine. It will be fixed in a newer version of the frame.
If you try it out, please share your experience and thoughts on what can be improved, so the next version comes out just as you want it!
3D printing settings
Prints on any 3D printer
Material: PLA+/PETG for prototyping and tests, PETG-CF or ASA-CF is a sweet spot for most consumer-grade 3D printers, or Nylon if your printer can handle it.
Works with 0.6 and smaller size nozzles.