Pentax Q10 Lens 02 Hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lens hood for the Pentax Q10 Lens 02 (5-15mm). There are two parts to color offset the inside of the lens hood, or…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 321
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
A lens hood for the Pentax Q10 Lens 02 (5-15mm). There are two parts to color offset the inside of the lens hood, or just use black. The fit is naturally tight, use a little spit to push them together, and once in place will stay locked for good. If you don't want a color difference on the inside, the outer piece is sufficient if printed in black (or other dark color), as the bleed through on lighter colors may produce other artifacts.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
30%
Filament: ANY ANY ANY
Notes:
Nothing special to print other than to position the lens hood mount side down and use some supports to capture the small overhangs and chamfer.
Fusion 360
Category: Camera