1 / 6
Warhammer Citadel Paint Mixer for Rotary Tool (Including Larger Bottles)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses an M3 bolt and nut to hold in place, use on lowest rotary tool speed PLA works fine preferred ASA (and successful)
- Ocena
- 4 / 5
- Polubienia
- 33
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 809
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (36)Powiązane
Hello Everyone!
I was ill so rather than creating my own tool I remixed this one, my rotary tool is a cordless one and has a small mount so I used an M3 nut and bolt to be able to attach it and then hold the paint with an elastic band. Use on you lowest speed setting as it will shake and vibrate, higher speeds cause it to shut off and vibrates you hands a lot.
Print on it's side.
Walls 5
infill: Gyroid 75-90% (makes it heavier which means it vibrates more and mixes better)
