Lighted Glass Dome and Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An IKEA Hack and a Remix. Start with IKEA Härliga Glass Dome, and print a number of the things that you like, in this…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
An IKEA Hack and a Remix.
Start with IKEA Härliga Glass Dome, and print a number of the things that you like, in this case squirrel pawns, which I use to test filament. I built up a lighted base, printer in a woodfil, lens printed with natural PLA, and the created the stands, all stl and123D Design files here to reuse. Lights are LED types that you can get on eBay or amazon, run on 12V. Printed on Prusa Original I3 MK2.
Print Settings
Printer:
Prusa Orignal i3 MK2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
200m
Infill:
20%
Notes:
3 Perimeters and 20% infill on the base and stand
160 Perimeters and 0% infill on the lens, which makes it a continuous spiral two layers deep.
Post-Printing
Build the base
Light sanding, and insert the LEDs,most will do a better job on this than me.
Category: Decor