Organizer Trays for Toyo T-190 and T-192 Toolboxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Five compartment organizer trays for small Toyo toolboxes
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This started as a little project to make a tray for organizing cash and coins and to develop some some modelling skills. I thought they were neat little organizers by the time I was done so thought I'd share. Let me know if you want other compartment variants.
Design notes:
The trays are all designed with fairly tight clearances so that coins or other items could be put in and the toolbox shaken around (while holding the lid closed obviously), even upside down so the coins wouldn't migrate between compartments. Compartments have some nice fillets including a big one at the front to make scooping coins or small items out easier.
Coin tray versions leave space underneath for pens, cash, etc. I print them the way they sit in the toolbox (requires a fair bit of support material) so that the nicely finished surface is on the bottom of the compartments.
Flat stack versions are designed to fit either up to two or three high in their respective toolbox. I had a little trouble with bed adhesion when printing these and it seemed that they sometimes want to pull off the print sheet starting at the corners. Glue stick on a satin sheet with PLA worked for me to eliminate this.