Broan / Sebo vacuum power head wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement wheel for the SEBO (3rd party broan) power head.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A replacement wheel for the Sebo / Broan powerheads. Ours cracked to pieces, so I made this split-rim replacement. No need to mess with the spring cap on the end of the axle, as those never go back on right. the two inner parts go around the axle, and screw to the wheel/hub.
I printed mine in PLA and it held up well, though you might want to go with petg if you have it ready on the printer. 4 top, 4 bottom, 4 walls, and 15% infill worked for us.
you're going to need 4x m3 heatset inserts, and 4x m3x8 screws. The countersink is designed for the hex head socket screws.
Keep things rolling, fix that wheel today.